<%@LANGUAGE="VBSCRIPT" CODEPAGE="936"%> improve the capacity by improving hammer crusher's structure
  HOME ABOUT US NEWS & INFO PRODUCTS SPARE PARTS INTERNATIONAL TRADE HONORS AFTER-SALES SERVICE CONTACT  
  From 1983,VIPEAK supplies what you require from stone crushing
machinery, sand making machinery, and grinding mill worldwide.
NEWS
  News & Info
  Product Knowledge
Honors
Environmental Certificate CE Certificate
Crusher and crushing plant Maintenance Items Home - News & Info  

improve the capacity by improving hammer crusher's structure

Hammer Crusher , the rack was designed before the inner shell is eight curved panels, from top to bottom mounted, each row of two, mounted in four rows. Installed a very small gap between each horizontal liner, but after long hours of work, the hammer to drive the continuous movement of raw materials impact, the gap continued to expand, even rack enclosure was worn out.
Vipeak heavy consideration to this issue, improvements in the design of the crusher. The original grooved grate frame changed to the grooves of the stent; segment grate shall be changed to the middle section with raised long grate. Original short arc lining both sides of the three into a lining of a large piece of the long arc widened. Fixed screw is reduced to eight, and both ends of the shortened 2cm.
If the device is improved in the late stage of the process, we can replace the grate of the frame when the equipment chassis 12 of the screw holes of the two sides, leaving only the bottom close to the device centerline of two of eight, the top of the eight the place of the screw holes on each drill eight the size of the holes, processing the screw holes of the growth ring. The holes not be welded directly sealed to prevent raw material dust powder leaked, pollution of the working environment.Source:http://www.crushertrade.com/

Copyright???2008 by?Vipeak Mining & Construction Machinery Co., Ltd. All rights reserved stone crusher Tel:?08058472222?/?08033970366 Email:?nigeria@vipeakgroup.com